LEVELMAX Tile Levelling System – Reusable T Leveller 50pcs/Bag

The LEVELMAX Reusable T Leveller is designed to help achieve a flatter, cleaner and more consistent tile finish during installation.

Pack size: 50 pcs / bag
System: Reusable T leveller
Material: PP + stainless steel
Adjustment: Screw adjustment

Follow the product instructions and adhesive guidance for your installation.

Request Trade & Bulk Pricing Enquire About Distribution

The LEVELMAX Reusable T Leveller is designed to help achieve a flatter, cleaner and more consistent tile finish during installation.

Unlike single-use base clips, this reusable T-shaped leveller uses a screw-adjust system to provide precise height control between tiles. Simply insert, rotate, adjust and release — no extra tools required.

Ideal for wall and floor tile installation, the LEVELMAX Reusable T Leveller helps reduce tile lippage, improve surface alignment and support a professional finish across ceramic, porcelain and stone tile projects.

Made from high-strength PP and stainless steel, it is durable, reusable and suitable for both residential and commercial tiling work.

Key Features

Reusable T-shaped tile levelling system
Helps reduce tile lippage
Provides precise height adjustment
Supports flat and even tile surfaces
No tools required — simple spin, adjust and release
Reusable design for cost-effective tiling
Made from high-strength PP and stainless steel
Suitable for wall and floor tile installation
Ideal for ceramic, porcelain and stone tiles
Suitable for residential and commercial use
ISO / SGS / CE marked

Trade & Distributor Supply

Available for trade, project and distributor enquiries. Contact LEVELMAX to discuss bulk pricing, stocking opportunities and supply arrangements for your market.

Distributor enquiries welcome across Australia. For trade suppliers, flooring and tiling retailers, building-material distributors and project buyers.

Enquire About Distribution

Application guidance

How to Use

Prepare the tiles and joints: Apply the specified tile adhesive to a properly prepared substrate and bed the adjoining tiles with adequate adhesive coverage. Use suitable spacers to maintain the specified joint width, and check that the T-pin fits the joint and tile thickness.
Insert and turn the T-pin: With the adjusting cap loosened, insert the T-pin into the joint with its crossbar parallel to the joint. Rotate it 90 degrees so the crossbar sits beneath both adjoining tile edges.
Adjust the tile level: Gently tighten the adjusting cap by hand until the adjacent tile edges align. Do not overtighten. Keep excess adhesive clear of the T-pin so it can be released.
Release before the adhesive hardens: Once the tiles are stable, remove the levellers before the adhesive fully hardens and traps the T-pins. Timing depends on the adhesive and site conditions; check the adhesive manufacturer's guidance rather than relying on a fixed number of hours.
Turn back and remove: Loosen the adjusting cap to release pressure, rotate the T-pin 90 degrees back until its crossbar is parallel to the joint, then gently lift it out. Do not kick, hammer or snap off a reusable T leveller.
Clean and reuse: Clean off adhesive before it hardens, then dry and inspect the levellers before reuse. Replace any damaged or bent components. Allow the tile adhesive to set as specified before grouting or traffic.

Important: Reusable T levellers control lippage; they do not replace joint spacers, a flat substrate, adequate adhesive coverage or specified movement joints.