LEVELMAX Tile Levelling System – Wedges 22-90mm 100PCS/Bag

The LEVELMAX Tile Levelling System Wedges are designed to help achieve a flatter, cleaner and more consistent tile finish during wall and floor tile installation.

Pack size: 100 pcs / bag
Wedge dimensions: 22-90mm
Material: Polypropylene (PP)
Use: Reusable

Follow the product instructions and adhesive guidance for your installation.

Request Trade & Bulk Pricing Enquire About Distribution

The LEVELMAX Tile Levelling System Wedges are designed to help achieve a flatter, cleaner and more consistent tile finish during wall and floor tile installation.

Used together with LEVELMAX Base Clips, the wedges apply consistent pressure between tiles while the adhesive sets, helping reduce lippage and improve tile alignment. Made from high-quality PP material, they are durable, reusable and suitable for both residential and commercial tiling projects.

Ideal for ceramic, porcelain and stone tile installation, these wedges are a practical tiling accessory for professional tilers, builders and renovators.

Key Features

22–90mm tile levelling wedges
Compatible with LEVELMAX Base Clips
Helps reduce tile lippage
Provides consistent pressure during installation
Reusable design for cost-effective tiling
Made from high-quality PP material
Suitable for wall and floor tile applications
Ideal for ceramic, porcelain and stone tiles
Suitable for residential and commercial use
ISO / CE marked

Trade & Distributor Supply

Available for trade, project and distributor enquiries. Contact LEVELMAX to discuss bulk pricing, stocking opportunities and supply arrangements for your market.

Distributor enquiries welcome across Australia. For trade suppliers, flooring and tiling retailers, building-material distributors and project buyers.

Enquire About Distribution

Application guidance

How to Use

Prepare and place the clips: Use compatible LEVELMAX Base Clips suited to the tile thickness and required joint width. Spread the specified tile adhesive, bed the first tile and position the clip bases beneath its edges. Lay the adjoining tile with the clip between the tiles.
Insert the wedges: Slide a wedge through each clip opening. Tighten by hand or with compatible adjustable levelling pliers until the adjacent tile edges are aligned. Do not overtighten or break the clips.
Allow the adhesive to set: Keep the joints and clip break points free of excess adhesive. Leave the wedges in position until the tile adhesive has hardened sufficiently, following the adhesive manufacturer's instructions and site conditions.
Remove the clips: Tap the protruding clip sections with a rubber mallet in the direction of the grout joint, not across it. Wear eye protection. The clip bases remain beneath the tiles.
Clean and reuse: Collect and clean the wedges for reuse. Remove loose clip pieces and joint debris before grouting, following the adhesive and grout manufacturers' instructions.

Important: Levelling wedges help control lippage between adjacent tiles. They do not replace a properly prepared, flat substrate or adequate adhesive coverage.