LEVELMAX Tile Levelling System – Base Clips 1.5mm 100PCS/Bag

The LEVELMAX Tile Levelling System Base Clips are designed for cleaner, flatter and more consistent tile installation.

Pack size: 100 pcs / bag
Grout joint: 1.5mm
Material: Polypropylene (PP)
Use: Single-use

Follow the product instructions and adhesive guidance for your installation.

Request Trade & Bulk Pricing Enquire About Distribution

The LEVELMAX Tile Levelling System Base Clips are designed for cleaner, flatter and more consistent tile installation.

With a 1.5mm grout joint, these clips help maintain even spacing between tiles while working with LEVELMAX wedges to apply consistent pressure across the tile surface. They help reduce lippage and support a professional finish for wall and floor tiling projects.

Made from high-quality PP material, LEVELMAX base clips are suitable for residential and commercial applications and are compatible with LEVELMAX Tile Levelling Wedges.

Key Features

1.5mm grout joint for consistent tile spacing
Helps reduce tile lippage
Supports flat and even tile installation
Compatible with LEVELMAX wedges
Made from high-quality PP material
Suitable for wall and floor tiles
Ideal for ceramic, porcelain and stone tiles
Suitable for residential and commercial use
ISO / CE marked
Easy break-off design after adhesive setting

Trade & Distributor Supply

Available for trade, project and distributor enquiries. Contact LEVELMAX to discuss bulk pricing, stocking opportunities and supply arrangements for your market.

Distributor enquiries welcome across Australia. For trade suppliers, flooring and tiling retailers, building-material distributors and project buyers.

Enquire About Distribution

Application guidance

How to Use

Check compatibility: Use these 1.5 mm Base Clips with compatible LEVELMAX Tile Levelling Wedges. Confirm that the clips suit the tile thickness and the joint width specified for your installation.
Position the clips: Spread the specified tile adhesive over a properly prepared substrate and bed the first tile. Slide the clip bases beneath its edges, then lay the adjoining tile with the upright clip stem between the tiles. Maintain adequate adhesive coverage beneath both tiles.
Insert the wedges: Slide a wedge through each clip opening. Tighten by hand or with compatible adjustable levelling pliers until adjacent tile edges align. Do not overtighten or break the clips.
Allow the adhesive to set: Keep joints and clip break points free of excess adhesive. Leave the clips and wedges in place until the adhesive has hardened sufficiently, following the adhesive manufacturer's instructions and site conditions.
Remove and clean: Wearing eye protection, tap the protruding clip sections with a rubber mallet along the grout joint, not across it. The clip bases remain beneath the tiles. Discard the broken clip sections, collect the wedges for reuse and clear loose debris before grouting.

Important: Base Clips are single-use; the wedges are reusable. Levelling clips help control lippage but do not replace a flat substrate, adequate adhesive coverage or specified movement joints.